...Round Bar Please click on a die number below for more information and drawing. (Material is made to order) Profiles are extruded to order. We do not hold stock. Aluminium Round Bar Imperial (inches) Metric...
...Round Tube Please click on a die number below for more information and drawing. (Material is made to order) Profiles are extruded to order. We do not hold stock. Aluminium Round Tube Imperial (inches)...
...Round Bar Please click on a die number below for more information and drawing. (Material is made to order) Profiles are extruded to order. We do not hold stock. Aluminium Half Round Bar Imperial (inches)...
...turnaround. For more information on any of the standard profiles listed below, click on the relevant link. Standards are made to order normally within 2 weeks. We do not stock profiles without prior agreement...
...round tube, bar or wire. Over-ageing Artificial ageing treatment at too high a temperature, or for too long a time, after the maximum hardening effect has been achieved. It causes some loss of properties....
...around which a specimen is bent. Bend Test The bending of a specimen to conform with a predetermined radius and angle, to assess bending characteristics and ductility. Blank A work-piece prepared for...
...tubes to prove that they material can withstand a specified pressure for a specified time without leakage or rupture. Proof Stress (Rp) The stress or applied load which produces a permanent elongation...
...tubes to prove that the material can withstand a specified pressure for a specified time without leakage or rupture. Proof Strength The tensile load required to extend a sample of material by 0.2% (RP0.2)...
...tubes in applications such as air conditioning. Fixed Mandrel A device for producing hollow extrusions of regular cross section. The tapered mandrel is attached to the main extrusion ram and passes through...
...tubes and sections. Aerospace materials are covered by the ‘L’ series of British standards. 6005A Aluminium Alloy Data Sheet Properties given are typical and should only be used for comparisons of alloys....